Classified Listing: BUY IT NOW! At Northstate auctions.
Weighs 1920 lbs
9'7" Long (115")
5'8" Width (68")
6'5" Tall (77")
|CG100||290 lbs. (132)||37.5" x 19" x 24"
(95,2 x 48,3 x 61)
A proxy bid would make it more difficult for others to outbid you.
A proxy bid is the highest amount you are willing to pay for an auction item.
In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your proxy bid amount) in order to maintain your lead position.
To get a proxy bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a proxy bid unless another bidder has a proxy bid in place that is higher than the amount you enter.
At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your proxy bid amount.
Your proxy bid amount is kept confidential from other bidders.
You can lower or delete a proxy bid by entering a lower amount.
Note: After watching hundreds of auctions and talking to thousands of bidders, we think using proxy bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.
You now have a proxy bid.
You can raise or lower your proxy bid at any time by entering a new amount.
If you wish to remove your proxy bid you can do so by entering an amount equal to the current bid into the bid form.
You can adjust this max bid by using the form above.
If you want to remove your max bid click here.
You can enter the minimum bid of %s or a greater amount.
If you bid more than the minimum bid you will get a max bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than %s.
John Deere F930 riding lawnmower
72 inch cutting deck
Weight: 1,880 Lbs
Beautiful 1970 Tandem Axle wire pulling trailer. We cleaned it up with some paint and had our mechanic and hydraulic guys give it the ok. Equipped with like new tires, it is ready to go back to work. What more is there to say? Make an offer today or call Rob at 530.570.9925 with any questions.
6 Door Hazardous Materials unit.
Sump Floor, Blast lighting, Blast roof, wet and dry Fire Suppression, and Ventilation fan.
Working doughXpress dough press. Removed from a active operation, tested and ready for use at yours.
The DXA-SS pizza press is designed for easy use and operation to reliably press dough balls. Thickness, shape and size are directly related to your dough ball, its shape, and the temperature of the dough, the recipe of your dough, type of lucubrating food oil, as well as the settings of your machine.
John Deere F932 Riding Lawn Mower 1995, 2WD
2006 TowMaster Car Trailer
6 Ton Capacity
Tire Size: LT235/85R16
Ford Thunderbird 2-door Hardtop Thunder Jet 429 V-8 Cruise-O-Matic
2 sets of Keys
Mileage indicated: 64,407
Estimated DMV Fees:
Doc Fee: $45.00
Your DMV paper work will need to be filled out at Surplus City in Oroville CA
** You must Call Rob for an Appointment 530-534-9956 **
1945 Willy's Custom Jeep
Up for sale we have a well upgraded custom 1945 Willy’s Jeep. This Jeep has a 1969 Buick V6 229 Engine with the original Transfer Case. The Transmission in this Jeep is a Manual GM Granny 4-Speed tranny; to support the torque of this motor you have a heavy duty rear drive line, a Air locker front axle, and a Detroit locker rear axle. This Jeep has a Pre-78’ Chevy Steering column with the ignition switch in the column and the power steering is fully functional. This Jeep is ready for the fun in the sun, go out in style with the confidence Jeeps were founded on.
Fully Fabricated Front Bumper Air Tank
Removable Cooler Rack (Was Originally Assembled to be permanent)
6X6 Military Deuce and a Half Truck. 2 1/2 Ton M35A2
Powered by a white 6 cylinder, turbo multifuel engine.
5 speed Transmission with a high and low transfer case
10 wheels touching the ground, all powered 6X6.
Air locker for front differential.
25,972 Miles Indicated
9.00-20 Military Tires
California sellers of vehicles subject to the regulations must notify the buyer that the vehicle may be subject to retrofit or accelerated replacement requirements and to print the disclosure on the bill of sale, sales contract addendum, or invoice. In addition, the seller must keep records of the disclosure notice for three years for each buyer. Sellers should provide the disclosure prior to the sale so that the buyer can be aware of the regulation when making a purchase decision.
The requirements are specified in title 13, California Code of Regulations, section 2025 which directs the seller to make the following text available to the buyer:
“An on-road heavy-duty diesel or alternative-diesel vehicle operated in California may be subject to the California Air Resources Board Regulation to Reduce Particulate Matter and Criteria Pollutant Emissions from In-Use Heavy-Duty Diesel Vehicles. It, therefore, could be subject to exhaust retrofit or accelerated turnover requirements to reduce emissions of air pollutants.” For more information, please visit the California Air Resources Board website at http://www.arb.ca.gov/dieseltruck.
This is a "Door Lite" Over-arm, Swing-arm Router use to cut holes in over-head door panels. The router is 1.5HP, 1725RPM, powered by 115V, 1Ph. This could be used to cut-out holes out on counter-tops as well.
Table-L: 60" / 1,524mm
78' x 12' Pressurized rail car storage vessel. Built in 1962 to rail car standards, this pressurized tank is designed to hold a working pressure of 115 psi. It was last inspected in 2012 and found to be in generally the same condition as manufactured.
This tank could also be used to store propane gas.
See documents tab above for current inspection document, and other relevant documents about this fabulous tank.
This tank is approximately 65000 gallons (by the math).
Up for sale at Northstate Auctions Buy it Now!
Tri Hull Aluminum Pontoon, Work boat/ Pumper boat. This boat is in fantastic condition, while it has seen service, it is very well built and it was not abused in its prior life. The heavy duty construction of this vessel is perfect for any marina of septic operator that needs marine pumpout capacities.
Custom made for a local marina by Campbel Craft Custom Boat Works, in Oroville Ca. This is a heavy duty working boat for any marina or harbor. The boat is approximately 36 foot long and 14.5 foot wide. It is powered by twin Mercruiser 3.0, 4 cylinder engines coupled with Mercury Alpha outdrives.
The marine pumpout system is a Waubaushene CHR600-C pumpout. The marine pumpout unit is powered by the Westerbeke gas generator. Capacity is 600 gallons. The holding tank is galvanized steel and is in excellent condition.
The boat and pumper has an onboard 8KW Westerbeke gas powered generator.
The controls are housed in an aluminum pilothouse with all gauges and even a propane heater for those cold days on the water. There are plenty of windows for great visibility and safety when motoring or working.
There is a 300 gallon freshwater tank housed midships in the center pontoon. The boat also has washdown water capability.
The boat comes with its own trailer. YOu can transport it to your facility, or you can use the trailer to service multiple facilities.
Stone Construction Equipment Walk-behind gas powered Concrete Grinder
A Stone Cretemower cuts a lot more than just concrete. That's because it can trim labor costs and save time, too, by eliminating mistakes. Use it to grind, smooth and clean excess concrete off any dry or hardened concrete surface or slab.
Grind down rough spots 75 percent faster than abrasive stones with the Stone Cretemower with a diamond-studded mowing head. The high-quality industrial diamond head, with 10 or 20 cutting segments, works faster than any known conventional method.
1954 Kaiser Manhattan, Sedan, 4-Door, 6-Cyl
Up for sale is a 1954 Kaiser Manhattan, Sedan with 4-doors and a 6-Cyl. Take a look at the photos and please call us at (530) 534-9956 to schedule an appointment to take a look at it or reply via email. Thank you.
The history of Kaiser:
In 1951, Frazer debuted a new design that would continue until the
company's end of U.S. passenger car production in 1955. Designed by
Howard "Dutch" Darrin, the cars were longer, lower, and swoopier. The
top-of-the-line Manhattan cost just over $3,000, and fewer than 300 were
produced in all.
The Frazer Manhattan was available as either a four-door sedan or a
four-door convertible and carried a look that was not shared with sister
Kaiser models. The sedan resembled a convertible with the top up as it had
minor creases at the B- and C-pillars, meant to evoke convertible top bows.
A 226-cid, 115-hp, six-cylinder engine was used, and the motor was mated to
a Hydra-Matic transmission for the first time.
For 1952, the Manhattan name was shifted to the Kaiser nameplate, and the
car received a markedly different exterior that was consistent with the rest of
the brand. Most notably, a pronounced dip adorned the center of the
windshield and rear glass, and the grille had a simple top bar that curved
around the front fenders. For this model year, body style choices were
greatly revised, as the convertible model was removed, a club coupe and a
two-door sedan were added, and Traveler configurations could be ordered.
List prices dropped considerably, and production numbers were much higher.
The 1953 model year was mostly the same, though the Manhattan could be
ordered with "Bambu" interior, and body choices were limited to a two-door
club sedan, and four-door sedan, and a Traveler sedan. For 1954, Darrin
redesigned the Manhattan's grille in a new "jet air-scoop" design, supposedly
borrowed from the Buick XP-300 show car. More importantly a McCulloch
supercharger became standard on the Manhattan's old flathead six, which
boosted output to 140 hp. Even so, sales dropped to 4,325 Manhattans.
By 1955, it was all over. Only 1,231 supercharged Manhattans were built that
year, with 1,021 being sent to Argentina. The tooling was sent down to
Buenos Aires and the Kaiser Manhattans continued to be sold in South
America until 1962 as the Carabella.
The Kaiser-Frazer Manhattan is a rare and eye-catching car today. When
new they were fairly luxurious, and the supercharged cars in particular
provided adequate power. The four-door convertible is an interesting body
style, and the 1951 models are particularly handsome. The 1955 Manhattans
sold in the U.S. are also quite collectible due to their rarity and performance.
Locating a Manhattan in top condition is possibly the hardest part of owning
1993 GMC Utility Truck 89,881 Low Miles
Runs, see video
shower / water tank / tool boxes/ dually / 4 wheel drive / GMC / TMC3500 SL / 10,000 lbs warn winch with controller
7.4 liter Gas Motor
Former Government Rescue Vehicle
Gross Vehicle Rating: 12,000
John Deere Gator 6x4
1127 hours indicated on hour meter
As is, where is, forklift rotator. Must Sell!
Heavy Duty Forklift Rotator removed from a working lift. Ready to bolt on and go.
Low Boy Semi Trailer
Selling today is a basically unused Ex-Air Force Low Boy Semi Trailer.
20 ton capacity
35 foot deck length
Up for sale is a John Deere 750 Tractor with a belly mower. Tractor has 1306 hours. It starts right up and runs very smoothly and everything seems to function. Blades on the mower spin beautifully. The tractor does shows signs use and age which includes some slight cracks, rust, scratches, and scuffs. Seat is also worn and discolored. This is a very good reliable machine and is sure to work through anything you throw at it. I have taken photos of what I believe are angles that are important to show, but if you would like additional photos, please feel free to message us and we will get them to you ASAP. We are currently only offering local pick up on this 750. We will assist with finding a freight company for shipping if needed.
Serial Number: CH3043D018291
Extra Equipment: Mid Mount Mower
Up for sale is a 1994 John Deere Gator 6X4 with 2990 hours. The gator starts right up and runs very smoothly. Shows signs use and age which includes some slight cracks, rust, scratches, and scuffs. Seats are also worn and discolored. Has an electric dump which is fully functional. This is a very good reliable machine as John Deere really makes long lasting durable machines. Why wait? Add this gator to your collection.
Up for sale is a 1964 Clark C50B Forklift. The unit shows 0945 hours on the meter. The forklift starts right up and runs very smoothly. Shows signs use and age which includes some rust, scratches, and scuffs. Seat is also a little worn. This is a very good reliable machine and is sure to work through anything you throw at it. I have taken photos of what I believe are angles that are important to show, but if you would like additional photos, please feel free to message us and we will get them to you ASAP. We are currently only offering local pick up on this forklift. We will assist with finding a freight company for shipping if needed.
Serial Number: C50B160626T064
1/2" Hydraulic Hose Reel
Available is a 1/2" Hydraulic Hose Reel with a 3/4" return. Manufactured by American Reeling Devices in 2000, retailed at $1,400 available at Surplus City for $750.00. For more information please contact Surplus City at 530-534-9956.
1911 Chuck Wagon
Konstruktions - Workstatte
Approx 11'6" Long
Approx 4'8" Wide