Solar Liquidation Auction Day 2!!!

All items closed

FORMS you may need:

Farm Tax Exemption PDF https://www.boe.ca.gov/pdf/boe230d.pdf

CA Resale Certificate PDF http://www.boe.ca.gov/pdf/boe230.pdf

Page 2 of 22    
Previous Page|Next Page
Grid with imagesList view
Page 2 of 22    
Previous Page|Next Page
Grid with imagesList view
You can enter a new proxy bid at any time by entering a bid greater than your current high bid.
A proxy bid would make it more difficult for others to outbid you.

A proxy bid is the highest amount you are willing to pay for an auction item.

In response to other bids, the auction system will automatically increase your bid in the smallest increment possible (up to your proxy bid amount) in order to maintain your lead position.

To get a proxy bid you simply enter the maximum amount you are willing to pay into the bid form just as you would any other bid. If your bid is more than one bidding increment above the current high bid you will get a proxy bid unless another bidder has a proxy bid in place that is higher than the amount you enter.

At the end of the auction, the winning bidder pays only the lowest winning bid possible. That means that you can win an auction item at a price less than your proxy bid amount.

Your proxy bid amount is kept confidential from other bidders.

You can lower or delete a proxy bid by entering a lower amount.

Note: After watching hundreds of auctions and talking to thousands of bidders, we think using proxy bids in your bidding strategy works best for most people. It eliminates some of the pressure and reduces the risk of "sniping", where other bidders slip in slightly higher bids in the last seconds of bidding.

You now have a proxy bid.

You can raise or lower your proxy bid at any time by entering a new amount.

If you wish to remove your proxy bid you can do so by entering an amount equal to the current bid into the bid form.

You have a proxy bid of %s on this item. That means that the system will place bids for you in response to bids from other bidders, up to %s.

You can adjust this proxy bid by using the form above.

If you want to remove your proxy bid click here.
You can add a proxy bid to protect your item against other bidders by using the form above.
Place a bid using the form above.

You can enter the minimum bid of %s or a greater amount.

If you bid more than the minimum bid you will get a proxy bid that the system will use to bid for you against other bidders, up to the amount you enter. So if you enter a bid of %s for this item, the system will place bids on your behalf in response to bids from other users until someone bids more than %s.
LowHighIncrement
$0.00$101.00$5.00
$101.01$1,000.00$10.00
$1,000.01$5,000.00$50.00
$5,000.01$50,000.00$100.00
$50,000.01$100,000.00$500.00
$100,000.01$100,000,000.00$1,000.00
LowHighIncrement
$0.00$100,000,000.00$1.00
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10-12V 10 amp 12V

  • The SunSaver 10 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display. The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10-12V 10 amp 12V

  • The SunSaver 10 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display. The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10-12V 10 amp 12V

  • The SunSaver 10 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display. The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10-12V 10 amp 12V

  • The SunSaver 10 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display. The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10-12V 10 amp 12V

  • The SunSaver 10 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display. The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10-12V 10 amp 12V

  • The SunSaver 10 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display. The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10-12V 10 amp 12V

  • The SunSaver 10 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display. The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10-12V 10 amp 12V

  • 5 in lot
  • The SunSaver 10 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display. The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10-12V 10 amp 12V

  • 5 in lot
  • The SunSaver 10 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display. The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10-12V 10 amp 12V

  • 5 in lot
  • The SunSaver 10 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display. The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Lot of Morningstar SunSaver Charge Controller, SS-10L-12V 10 amp 12V

  • The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver 10L 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high-volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded battery select
  • Rated to 25% overloads
  • No need to derate
  • Fully encapsulated in epoxy potting
  • Parallel for 40 amps or more
  • Green charging/Red LVD indicators
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Lot of Morningstar SunSaver Charge Controller, SS-10L-12V 10 amp 12V

  • The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver 10L 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high-volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded battery select
  • Rated to 25% overloads
  • No need to derate
  • Fully encapsulated in epoxy potting
  • Parallel for 40 amps or more
  • Green charging/Red LVD indicators
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Lot of Morningstar SunSaver Charge Controller, SS-10L-12V 10 amp 12V

  • The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver 10L 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high-volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded battery select
  • Rated to 25% overloads
  • No need to derate
  • Fully encapsulated in epoxy potting
  • Parallel for 40 amps or more
  • Green charging/Red LVD indicators
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Lot of Morningstar SunSaver Charge Controller, SS-10L-12V 10 amp 12V

  • The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver 10L 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high-volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded battery select
  • Rated to 25% overloads
  • No need to derate
  • Fully encapsulated in epoxy potting
  • Parallel for 40 amps or more
  • Green charging/Red LVD indicators
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Lot of Morningstar SunSaver Charge Controller, SS-10L-12V 10 amp 12V

  • The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver 10L 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high-volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded battery select
  • Rated to 25% overloads
  • No need to derate
  • Fully encapsulated in epoxy potting
  • Parallel for 40 amps or more
  • Green charging/Red LVD indicators
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10L-12V 10 amp 12V

  • The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver 10L 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high-volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded battery select
  • Rated to 25% overloads
  • No need to derate
  • Fully encapsulated in epoxy potting
  • Parallel for 40 amps or more
  • Green charging/Red LVD indicators
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10L-12V 10 amp 12V

  • The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver 10L 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high-volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded battery select
  • Rated to 25% overloads
  • No need to derate
  • Fully encapsulated in epoxy potting
  • Parallel for 40 amps or more
  • Green charging/Red LVD indicators
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10L-12V 10 amp 12V

  • The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver 10L 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high-volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded battery select
  • Rated to 25% overloads
  • No need to derate
  • Fully encapsulated in epoxy potting
  • Parallel for 40 amps or more
  • Green charging/Red LVD indicators
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10L-12V 10 amp 12V

  • The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver 10L 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high-volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded battery select
  • Rated to 25% overloads
  • No need to derate
  • Fully encapsulated in epoxy potting
  • Parallel for 40 amps or more
  • Green charging/Red LVD indicators
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10L-12V 10 amp 12V

  • The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver 10L 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high-volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded battery select
  • Rated to 25% overloads
  • No need to derate
  • Fully encapsulated in epoxy potting
  • Parallel for 40 amps or more
  • Green charging/Red LVD indicators
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10L-12V 10 amp 12V

  • The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver 10L 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high-volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded battery select
  • Rated to 25% overloads
  • No need to derate
  • Fully encapsulated in epoxy potting
  • Parallel for 40 amps or more
  • Green charging/Red LVD indicators
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10L-12V 10 amp 12V

  • The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver 10L 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high-volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded battery select
  • Rated to 25% overloads
  • No need to derate
  • Fully encapsulated in epoxy potting
  • Parallel for 40 amps or more
  • Green charging/Red LVD indicators
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10L-12V 10 amp 12V

  • The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver 10L 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high-volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded battery select
  • Rated to 25% overloads
  • No need to derate
  • Fully encapsulated in epoxy potting
  • Parallel for 40 amps or more
  • Green charging/Red LVD indicators
  • See photos for details
Extended Bidding: i
Click to view Item Bid History Click to view Item Photo Gallery

Item Description:

Morningstar SunSaver Charge Controller, SS-10L-12V 10 amp 12V

  • The SunSaver 10 is a PWM controller and can control up to 10 array amps (can be paralleled for 40 amps or more). The SunSaver’s advanced design delivers outstanding performance and value. The SunSaver 10L 12 volt controller offers most of the same features of the ProStar line, but without the battery status LEDs, automatic equalization or the optional LCD display.
  • SunSaver’s low cost is made possible by Morningstar’s unique approach to design and manufacturing: automated production, latest electronic power technologies, latest control and logic technologies, and high-volume manufacturing.
  • 100% solid state
  • Series design (no shunt)
  • True 0 to 100% PWM duty cycle
  • Setpoint accuracy to 35 mV
  • Marine-rated terminals/anodized case
  • Temperature compensation
  • Sealed/flooded battery select
  • Rated to 25% overloads
  • No need to derate
  • Fully encapsulated in epoxy potting
  • Parallel for 40 amps or more
  • Green charging/Red LVD indicators
  • See photos for details

Please wait...